The video above provides a great tutorial on how to install LED fog lamps onto an Infiniti G35. The video is fairly short roughly 6 minutes long. So if you have the right tools before watching the video you could easily go along with the tutorial one step at a time.

There are several styles and colors to chose from when selecting the best LED fog lights for your Infiniti G35. Here are a few to select from for your Infiniti:

• LED Bulb Gold Yellow LED Fog Light Bulbs – $29.99
• Ice Blue LED Bulbs for Fog Driving Light Lamps – $24.99
• Super Extremely Bright White LED Bulbs for Fog Light Lamps – $24.99

When a car’s suspension is upgraded with lowering springs, the result is a lower ride height, a more aggressive look, and better handling due to the lowered center of gravity. While those things are great improvements for the car, the tires suffers from increased wearing and tearing since the tires will slant inwards towards the inside fender.

A camber kit will allow the car to remain at the lowered ride height while correcting the angle of the tire closer to the spec it was supposed to be.

The video above provides you a tutorial on how to replace the PCV valve on the Infiniti G35. There are various replacement Positive Crankcase Ventilation Valve parts on Amazon. See them below:

• Beck Arnley 045-0347 Positive Crankcase Ventilation Valve
• Infiniti 11810-8J102, PCV Valve (Official Infiniti Part)
• OES Genuine PCV Valve for select Infiniti/Nissan models
• Standard Motor Products V399 PCV Valve
• PTC PCV2386 PCV Valve

You may also want to consider replacing the PCV O-Ring on your Infiniti.

So you got stuck to where you can’t figure out how to open the gas panel on your Infiniti G35? Well if you follow these simple directions you’ll have it open in no time.

• Step 1 – Step outside your Infiniti.
• Step 2 – Click the unlock button on your key fob to unlock all your doors
• Step 3 – Push the fuel door in and POW! It should open up.

You can get a replacement Locking Fuel Cap for around $8.95 plus shipping costs.

Looking to add a fresh look to your grille? LEDs are the way to do it! By adding bright LED strips behind your grille, you can add a lot to the look of your vehicle. Diode Dynamics has been producing and designing easy-to-install LED kits for nearly a decade, and this kit is no exception. After months of planning, we have designed new LED strips to be used in this kit, which are highly flexible, weatherproof, and long-lasting.

This is the single-color version of our kit, but please be sure to check out the multicolor version as well, which uses our new remote-controlled RGB Multicolor lighting! Included in the kit: – 2 (two) 30-5050 SMD Strips (flexible and waterproof) – Universal Grille Wiring Harness – LED Toggle switch in matching of LED color (Blue switch for Cool White and Warm White) – Power splitter and adapters to easily wire up the strips – 4 (four) zip-ties and 3M outdoor adhesive pads for mounting strips.

Grab some for your car and customize your Infiniti G35 Grille.

This kit will make your LED tail light also function as the turn signal on your Infiniti G35 Coupe. By eliminating the factory incandescant turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance.

Using OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don’t even have to remove your tail lights!

Get yours today for around $40.00 plus shipping.

Boost your vehicle’s horsepower, torque, throttle response and fuel economy with an advanced Innovative Performance Chip! Safely gain up to +35 HP and up to +5 MPG in fuel mileage in your vehicle by safely optimizing your air/fuel ratio and timing curve for increased efficiency! Easily installs in less than 10 minutes, with absolutely no mechanical experience required! All Innovative Performance Chips come with an installation kit, including detailed installation instructions with easy to follow step-by-step pictures!

Boost your Infiniti today! Only $69.95 at Amazon